Go Green and Save Green!

When selecting finishes, select the RoHS compliant finishes. They are better for the environment and less expensive!

PX-1600 Size 6 mm Bracket Receptacle

Part Number Finish
1633-6310-Z3CT (Standard Finish)
Zinc Trivalent Clear .0003 thick. Trivalent Chromate Clear with Sealer (RoHS Compliant)
Specification(s): ASTM-B-633, Type III, SC 2, Clear
Suffix: -Z3CT
1633-6310-Z3YT

Discontinued when current inventory is consumed.

Zinc Trivalent Yellow .0003 thick, Trivalent Chromate Yellow Dye with Sealer

We recommend the Z3CT finish instead of the Z3YT finish. The Z3CT finish is much more cost effective and provides the same salt spray benefits as the Z3YT finish. (RoHS Compliant)
Specification(s): ASTM-B-633, Type II, SC 2, Yellow
Suffix: -Z3YT
1633-6310-Z3BT Zinc Trivalent Black .0003 thick. Trivalent Chromate Black Dye with Sealer (RoHS Compliant)
Specification(s): ASTM-B-633, Type II, SC 2, Black
Suffix: -Z3BT
1633-6310-ZFBT

Discontinued when current inventory is consumed.

Zinc Flake Coating with Black Sealer
Delta Seal Black GZ Coating (RoHS Compliant)
Specification(s): Delta Protekt; KL100
Suffix: -ZFBT

Material: Spring Steel

Mechanical:
Maximum Load without Distortion:
50 lb.
Maximum Torque: 31 in.-lb.


The Right Angle Bracket can be welded or riveted to the support structure.

F = P + 2.0 mm (.079 in)

Calculate F Dimension

Using the table below, find the F Dimension range that applies to your calculated F range. The "G" for the Stud Part Number is stated to the right of the applicable F Dimension range.

F Dimension "G"
mm in
1.5-2.4 .059-.094 09
2.5-3.4 .098-.134 10
3.5-4.4 .138-.173 11
4.5-5.4 .177-.213 12
5.5-6.4 .217-.252 13
6.5-7.4 .256-.291 14
7.5-8.4 .295-.331 15
8.5-9.4 .335-.370 16
9.5-10.4 .374-.409 17
10.5-11.4 .413-.449 18
11.5-12.4 .453-.488 19
12.5-13.4 .492-.528 20
13.5-14.4 .531-.537 21
14.5-15.4 .571-.606 22
15.5-16.4 .610-.646 23
F Dimension "G"
mm in
16.5-17.4 .650-.685 24
17.5-18.4 .689-.724 25
18.5-19.4 .728-.764 26
19.5-20.4 .768-.803 27
20.5-21.4 .807-.843 28
21.5-22.4 .846-.882 29
22.5-23.4 .886-.921 30
23.5-24.4 .925-.961 31
24.5-25.4 .965-1.000 32
25.5-26.4 1.004-1.039 33
26.5-27.4 1.043-1.079 34
27.5-28.4 1.083-1.118 35
28.5-29.4 1.122-1.157 36
29.5-30.4 1.161-1.197 37
30.5-31.4 1.201-1.236 38