ST-1200 Line Size 3 Receptacles - S-Spring

Size 3 S Spring

Material: Music wire

Finish:

Optional Stainless Steel: Stainless steel, 300 series on special order. Change the suffix from -Z3CT to -SS.

Optional Finishes: Change the suffix on the basic part number from Z3CT to the desired finish. See the finishes table.

Weight: .0009 lb (0.41 g)

Recommended Deflection: .020" to .045" (.51 to 1.14 mm)

Calculating Stud Length

RECEPTACLES TOTAL PILEUP = Panel + Support + Gap

1. First calculate the total pileup. Add Panel thickness + Support thickness + Gap thickness.
   NOTE: The gap is the distance between the panel and the support, and it may be the result of panel and support shape, use of a grommet or other stud retainer, or by use of a spacer. The Gap Thickness dimension will equal zero when the panel surface is flush to the support surface. For example, Gap = 0 when the underside of the panel is counter bored to accept the thickness of the stud retainer.
2. Using the calculated total pileup for the chosen receptacle, locate your total pileup in one of the ranges in the table below and find the Stud Grip size to the left. The Stud Grip is added to the end of the stud part number. For example: in the stud part number "121J-350-Z3CT", the Stud Grip is "50".