ST-1200 Line - Size 6 Studs

The information on the ST-1200 Size 6 products are provided for existing applications. For new applications, please use the Size 65 products.


Stud Dimensions

Stud Picture
Slotted
Part Number
Stud Picture
Phillips
Part Number
Stud Picture
Hex Recess
Part Number
Undercut
Dimension
(U)
Grip
Length
(G)
Steel Steel Steel inch mm inch mm
Stud Picture
Wing
Part Number
Undercut
Dimension
(U)
Grip
Length
(G)
Steel inch mm inch mm
Stud Picture
Flush
Part Number
Undercut
Dimension
(U)
Grip
Length
(G)
Steel inch mm inch mm
Stud Picture
Knurled
Part Number
Stud Picture
Tamper Resist
Part Number
Stud Picture
Ring
Part Number
Undercut
Dimension
(U)
Grip
Length
(G)
Steel Steel Steel inch mm inch mm

* is the "Stud Grip". For example, 121J-640 is an oval head stud with a "Stud Grip" of 40.

The undercut is a part of the stud which is smaller in diameter than the stud shank. The undercut is located directly under the head. This decreased diameter is where the retainer fits to prevent the stud from coming out of the mounting hole.

Note: For all raised head styles, the "G" (Grip) and "U" (Undercut) dimensions are measured to the underside of the head. For the flush head style, the "G" (Grip) and "U" (Undercut) dimensions are measured to the top of the head.