Ejecting Blades

Ejecting blades provide a simple and reliable means of stud ejection. The ejected stud is retained in proper alignment for locking, yet completely clears both support and panel holes.

For Size 3 Studs:

There are two styles of Ejecting Blades for the Size 3 Studs. The 1224-159, 1224-159-1 and 1224-1031-1 Ejecting Blades require a retainer to hold the stud. The 1224-721 Ejecting Blade has a split in the end with the hole smaller than the stud end. This allows the Ejecting Blade to clip over the undercut of the stud and to act as the stud retainer.

The 1224-159, 1224-159-1, 1224-1031, 1224-1031-1, and 1224-721 Ejecting Blades add .015 in. (0.38 mm) to the total pileup calculation.

1224-159-1-BB Ejecting Blade

Upon depletion of the existing stock of the 1224-159-BB and 1224-159-SS Ejecting Blade, they will be discontinued. At that time, please use the 1224-159-1-BB and 1224-159-1-SS Ejecting Blade.

1224-1031 Ejecting Blades

Part Number A Material Finish in mm 1224-1031-SS .096 2.44 Type 302 Stainless Steel, Spring Temper Natural 1224-1031-1-SS .100 2.54

1224-721 Ejecting Blade

Part Number Material Finish 1224-721-Z3CT Phosphor Bronze, Spring Temper 1224-721-SS Type 302, Stainless Steel, Spring Temper Natural

For Size 4, 5, 6, and 65 Studs:

The 1224-200-x Ejecting Blade adds .020 in. (0.51 mm) to the total pileup calculation.