Go Green and Save Green!

When selecting finishes, select the RoHS compliant finishes. They are better for the environment and less expensive!

 

TL-7800 Line Latches - 7883 Series
7883-42-Z3CT

SPECIFICATIONS
Part Number Material Finish1 Installation Ultimate Strength Working Strength Pull-up ability
7883-42-Z3CT Steel Z3CT Mounting holes will accept .156 inch diameter rivets or #6 round head screws. 200 lb 45 lb .2
(5.08 mm)
7883-42-SS Stainless Steel 300 Series Natural
1 The standard finish is Zinc Trivalent Clear .0003 thick. Trivalent Chromate Clear with Sealer (RoHS Compliant)
Specification(s): ASTM-B-633, Type III, SC 2, Clear
Suffix: -Z3CT

The yellow finish is also available:
Zinc Trivalent Yellow .0003 thick, Trivalent Chromate Yellow Dye with Sealer

We recommend the Z3CT finish instead of the Z3YT finish. The Z3CT finish is much more cost effective and provides the same salt spray benefits as the Z3YT finish. (RoHS Compliant)
Specification(s): ASTM-B-633, Type II, SC 2, Yellow
Suffix: -Z3YT

Note: The above mentioned finish will be supplied as the standard finish upon depletion of existing stock which are finished as follows: Zinc electroplate .0003 thick, yellow chromate (NOT RoHS Compliant)
Specification(s): ASTM-B-633, TYPE II, SC 2 YELLOW
Suffix: -Z3Y

7883-42 Dimension Drawing 7886-1 Picture
No Strike Needed
Dim. B
Strikeless Link Dimension Drawing
inch mm
.98 24.89
A strike is not required for the 7883-42-Z3CT or 7883-42-SS, however, any 7880 or 7882 strike may be used with these latches.
7882-C2 7880-C5 7880-C7 7880-C9
Strike Thumbnail Drawing Strike Thumbnail Drawing Strike Thumbnail Drawing Strike Thumbnail Drawing