|
|
SL-8400 Line Latches
Manufactured in
the United States of America!
|
|
The 8415 Slide Latch
consists of: (each sold separately)
- a slotted sliding bar which is sold assembled to a
mounting plate,
- a bush which is gripped in its grooved section by the
sliding bar, and
- a spacer which raises the bush to clear thick panels.
The sliding bar assembly is attached to the removable panel
and the bush is mounted to the panel's stationary support.
In closure the spring action of the bar resists opening under
vibration and shock loads. Clearance above the slide latch
need only allow for fingers to grip the sliding bar. The
latch is also sold with the handle pointing downward for
mounting on the underside of the panel.
|
|
The 8404 Push Panel to
Lock Slide to Open Plastic Slide Latch The latch is held
in position by spring tension. when the panel is pushed closed,
the sloped pawl edge meets the support corner and slides the
latch back. As the panel closes fully, the pawl clears the edge
of the support and the spring slides the latch forward to the
closed position. The panel is opened by sliding the latch back
with a finger.
|
|