ST-1200 Line Size 6 Receptacle - Weld Plate

The information on the ST-1200 Size 6 products are provided for existing applications. For new applications, please use the Size 65 products.

Spring Wire Diameter: .090 (2.29 mm)

Material:
Plate: steel
Spring: music wire
Rivets: stainless steel

Finish:
Plate: unfinished
Spring:

Optional Stainless Steel: Stainless steel is available on special order. Add the suffix "-SS" to the basic part number. (E.g. 1224-441-310-SS)
Plate and Rivets: 300-series
Spring: 17-7 PH

Weight: .0411 lb (18.64 g)
Recommended Deflection:.031 to .074 in. (.79 to 1.88 mm).

Calculating Stud Length

RECEPTACLES TOTAL PILEUP = Panel + Support + Gap

1. First calculate the total pileup. Add Panel thickness + Support thickness + Gap thickness.
   NOTE: The gap is the distance between the panel and the support, and it may be the result of panel and support shape, use of a grommet or other stud retainer, or by use of a spacer. The Gap Thickness dimension will equal zero when the panel surface is flush to the support surface. For example, Gap = 0 when the underside of the panel is counter bored to accept the thickness of the stud retainer.
2. Using the calculated total pileup for the chosen receptacle, locate your total pileup in one of the ranges in the table below and find the Stud Grip size to the left. The Stud Grip is added to the end of the stud part number. For example: in the stud part number "121J-6550-Z3CT", the Stud Grip is "50".