Go Green and Save Green!

When selecting finishes, select the RoHS compliant finishes. They are better for the environment and less expensive!


TL-7800 Line Latches - 7880 Series
7880-41-Z3CT and 7880-4124-Z3CT

Part Number Material Finish1 Installation Ultimate Strength Working Strength Pull-up ability
7880-41-Z3CT Steel Z3CT Mounting holes will accept .156 inch diameter rivets or #6 round head screws. 700 lb 100 lb .6
(15.24 mm)
7880-41-SS Stainless Steel 300 Series Natural
1 The standard finish is Zinc Trivalent Clear .0003 thick. Trivalent Chromate Clear with Sealer (RoHS Compliant)
Specification(s): ASTM-B-633, Type III, SC 2, Clear
Suffix: -Z3CT

The yellow finish is also available:
Zinc Trivalent Yellow .0003 thick, Trivalent Chromate Yellow Dye with Sealer

We recommend the Z3CT finish instead of the Z3YT finish. The Z3CT finish is much more cost effective and provides the same salt spray benefits as the Z3YT finish. (RoHS Compliant)
Specification(s): ASTM-B-633, Type II, SC 2, Yellow
Suffix: -Z3YT

Note: The above mentioned finish will be supplied as the standard finish upon depletion of existing stock which are finished as follows: Zinc electroplate .0003 thick, yellow chromate (NOT RoHS Compliant)
Specification(s): ASTM-B-633, TYPE II, SC 2 YELLOW
Suffix: -Z3Y

7880-41 Dimension Drawing 7886-1 Picture
No Strike Needed
Dim. B
Strikeless Link Dimension Drawing
inch mm
.57 14.48
A strike is not required for the 7880-41-Z3CT or 7880-41-SS, however, any 7880 or 7882 strike may be used with these latches.
7882-C2 7880-C5 7880-C7 7880-C9
Strike Thumbnail Drawing Strike Thumbnail Drawing Strike Thumbnail Drawing Strike Thumbnail Drawing

NOTE: The 7880-41-Z3CT is available with a secondary lock to prevent accidental opening of the latch. Insert "24" in front of the finish suffix in the part number.

7880-41-Z3CT changes to 7880-4124-Z3CT

7880-xx24 Picture showing Secondary Lock