|
|
5/16" Flush Head or Wing Head
Self-Ejecting Fastener and
1" Spacing Weld Plate Receptacle
To order, add up the thickness of the panels being joined together,
as shown here. Next,
locate the total thickness on the chart. The part number is shown
under the Part Number column.
Total Material
Thickness |
Stud Grip |
Spring Height |
|
|
|
5/16"
Wing Head Stud
Part Number |
5/16"
Flush Head Stud
Part Number |
1" Spacing
Weld Plate
Part Number* |
*
4639-24945-335-14S-PAS");
displayRowNoPN(".092"-.125"",".400"",".310"","4639-5W5-400-Z3CT","4639-55-400-Z3CT","4639-24945-310-Z3CT*
4639-24945-310-14S-PAS");
displayRowNoPN(".117"-.150"",".400"",".285"","4639-5W5-400-Z3CT","4639-55-400-Z3CT","4639-24945-285-Z3CT*
4639-24945-285-14S-PAS");
displayRowNoPN(".142"-.175"",".500"",".360"","4639-5W5-500-Z3CT","4639-55-500-Z3CT","4639-24945-360-Z3CT*
4639-24945-360-14S-PAS");
displayRowNoPN(".167"-.200"",".500"",".335"","4639-5W5-500-Z3CT","4639-55-500-Z3CT","4639-24945-335-Z3CT*
4639-24945-335-14S-PAS");
displayRowNoPN(".192"-.225"",".550"",".360"","4639-5W5-550-Z3CT","4639-55-550-Z3CT","4639-24945-360-Z3CT*
4639-24945-360-14S-PAS");
displayRowNoPN(".217"-.250"",".550"",".335"","4639-5W5-550-Z3CT","4639-55-550-Z3CT","4639-24945-335-Z3CT*
4639-24945-335-14S-PAS");
displayRowNoPN(".242"-.275"",".550"",".310"","4639-5W5-550-Z3CT","4639-55-550-Z3CT","4639-24945-310-Z3CT*
4639-24945-310-14S-PAS");
displayRowNoPN(".267"-.300"",".550"",".285"","4639-5W5-550-Z3CT","4639-55-550-Z3CT","4639-24945-285-Z3CT*
4639-24945-285-14S-PAS");
?>
Note: On the Weld Plate Receptacle, only the Spring
is plated. The plate is not plated to allow for welding.
* Upon depletion of existing stock, the spring
will change from zinc plated (-Z3CT) to type 316 Stainless
Steel (-14S-PAS).
|
